SINK
Seals Directly to the Counter
No metal rim is needed for fitting a new kitchen sink made by Kohler Co., Kohler, Wis., USA. The unit seals directly to the counter.
Produced in a range of colours, the Brookfield, as it is known, is made of enamelled cast iron. It has two com-
Brookfield kitchen sink
partments and measures 32 in, by 21 jn.
Corners are gently rounded and drains are placed off-centre.
Agents include Berents and Asso- ciates, Hong Kong, and Atkins Kroll and Co., Inc., Manila.
LIGHTING FITTINGS
Three Diffusers Offered
With Ceiling Drums
RECESSED and surface-mounted ceiling fittings and double-louvred pendant drums are new items being marketed by Merchant Adventurers, Ltd..
Road, Feltham, Hampton
Middx.. UK.
Three types of diffuser moulded louvres, pressed opal glass, and lens
are offered in the MA 1940 series of recessed and surface-mounted fittings, which may be 7. 12 or 16 in. in diameter, to take lamps of 100-200 aluminium drum, which
W.
The
varies from 2 to 3 in. in depth, is anodised silver as standard, but may be stove-enamelled black, grey or red. A number of patterned drums, with pierced slots, are also available.
The double-louvred pendant drum fittings, Series MA 3440, are in two sizes, 12 in. (100 w.) and 15 in. (150- 200 w.) in diameter. Plastic circular
1945L (top), 1945G, 1945E
Far East Architect & Builder June, 1966
louvres project slightly both above and below the anodised satin-silver or pale-gold aluminium drum: a narrow aluminium cylinder, which is white stove-enamelled, receives the flex.
Agents are Tan Chang Moh, Singapore, and British General Elec- tric Co., Ltd., Hong Kong.
SANITARY FITTING
Close Coupled Suite with Foot Pedal
LATEST addition to the Fordham range of flushing cisterns is the Uniterna close coupled suite with Tredflo foot pedal operation.
The cistern is made from poly- styrene and is fitted with a plastic syphon and a Delrin ballvalve. It can be used with water of any hard- ness, including sea water.
The vitreous china pan has its narrowest point at the W.C. sump so that the possibility of blockage is eliminated. Only lin. of movement
Uniterna close coupled suite
is needed on the pedal to operate the cistern. The unit measures 261⁄4 in. from the wall to the front of the pan and is 30in. high.
Fordham Pressings, Ltd., Dudley Road, Wolverhampton, UK. are the makers.
Agents are: Tan Kwang Seng and Co., Ltd., Singapore; Hut- chison (Building) Ltd., Hong Kong: and Rundle and Co., Ltd.. Bangkok.
TRUNKING
Hank Bushes Allow Speedy Assembly
THE number of components in Fast-Fit conduit trunking has been reduced to a minimum in order to simplify erection. The parts have hank bushes, and can be quickly snapped together; screws are only used where the weight necessitates particularly strong joints.
Made of galvanised sheet steel rust-and corrosion-proof, and requir- ing no painting-Fast-Fit is said to stand up to hard knocks. The range comprises: 2 in. sq. trunking channel, 15 in. joining coupler, suspension unit, cable-retaining clip, end cover.
Fast-fit snap-on sections
suspension bracket (with split pin), 34 in. deep flanged coupling, 51⁄2 in. right-angle bend, 7% in. riser bend (left or right). 9 in. deep three-way box, 81⁄2 in. by 81⁄2 in. four-way box, external lid and internal lid. Because of the absence of screws, suspension brackets and external lids can be slid along to give access to the wiring.
Courtney. Pope (Electrical) Ltd., Amhurst Park Works, London, N.15, UK, are the makers. Distributors include R.E. Morris, Ltd., Singapore, and China Engineers, Ltd.. Hong Kong.
AIR DISTRIBUTION
Low Pressure Flow Through Perforated Ceiling
AN
air-distribution
system,
de-
veloped by the Armstrong Cork Co., Lancaster. Penn., USA, employs a new type of acoustic ceiling which al- lows conditioned air to flow directly into the room at low pressure and velocity through thousands of tiny perforations.
The system eliminates a substantial amount of ductwork. In many cases, a single stub duct is all that is requir- ed to deliver the necessary volume of air to the plenum space above the ceiling. The conditioned air simply
this disperses throughout
space, builds up a slight pressure, and is pushed down into the room through the ceiling perforations steadily forc- ing the air just below it lower and lower into the room.
The ventilating perforations in the acoustical material are blended in with the surface design and cannot be distinguished in an installed ceiling.
Since uniformity of air flow through the new ventilating ceiling is directly related to the uniformity of pressure in the plenum above the ceiling, Armstrong engineers have developed a complete plenum engineering pro- cedure designed to minimize the effect of such factors as friction, tur- bulence and static pressure regain which can affect plenum pressure.
Armstrong Cork have a marketing office in Hong Kong. Distributors include: A. V. Dionisio, Manila: Getz Bros. and Co., Singapore, Bang- kok, Taipei, and Hong Kong; and
Co., Hyundae Engineering Seoul.
Ltd.,
67
No comments yet.
Private notes are available after approval.