Act of Colonial Legislature or other Authority under which levied.
(A double-ended boiler is to be counted as two single-ended boilers).
| Item | Fee | Notes |
|---|---|---|
| Survey of marine boilers | $30 | See Regulation 17. |
| Survey of mountings for one marine boiler | $15 | |
| For every additional similar set | $25 | |
| Survey of one evaporator | $15 | |
| Survey of one food heater | $15 | |
| Survey of one food filter | $15 | |
| Survey of one distiller | $15 | |
| Survey of one water circulator | $15 | |
| For each additional evaporator, food heater, food filter, distiller or water circulator | $20 | |
| Survey of an installation for burning oil fuel | $40 plus $20 for first boiler, minimum | |
| For every additional boiler | $20 | |
| Survey during construction of heaters and filters for use in connection with oil fuel installations, for each item inspected | $5 | |
| Survey of one or two safety valves | $10 | |
| For every additional similar safety valve included in the same order | $5 | |
| Inspection of finished manhole doors and compensating rings, for the first 15, or portion of 15, inspected at the same time | $24 | |
| For each additional 15, or portion of 15, included in the same order and inspected at the same time | $20 |
Note: A door with its own ring is counted as one article; separate doors and rings as one each.
Ordinance 10 of 1899.
| Item | Fee |
|---|---|
| For each additional visit beyond two made by the Surveyor in connection with the tests of forgings, plates, bars, etc. | $228 |
| Inspection and tests of one or two steel furnaces | $10 |
| For each additional furnace included in the same order | $20 |
| Inspection and tests of one or two steel forgings, or steel castings for stem, stern-post, rudder, etc., if made by the same maker | $10 |
| For each additional forging, or casting as the case may be, by the same maker, included in the same order | $20 |
| Witnessing tests of solid drawn steel steam pipes, for each 15, or portion of 15, tests of the material made | $10 |
| For each 30, or portion of 30, pipes tested by hydraulic pressure | $20 |
| Inspection of wrought iron steam pipes, including hydraulic test, for each 15, or portion of 15, pipes inspected | $20 |
| Inspection and tests of boiler tubes subject to external pressure: Lapwelded iron tubes and lapwelded or solid drawn steel tubes for which a stress greater than that allowed for iron is not required, for the first 100, or part of 100, tubes | $20 |
| For each succeeding 100, or part of 100, tubes | $15 |
---
Page 51
(A 51 )
SPECIFICATION OF TAXES, DUTIES, &c.
Act of Colonial Legislature or other Authority andar which levied.
SURVEY OF STEAMSHIPS,—Continued,
Item.
(A double-ended boiler is to be counted as two single-ended boilers).
Survey of marine boilers
Survey of mountings for one marine boiler
for every additional similar set
Survey of one evaporator
Survey of one food heater
Survey of one food filter...
-
Survey of one distiller.....
Survey of one water circulator
...
J
:
:
Fee.
See Regula
tion 17.
$ 30
15
25
15
15
15
15
15
29
60
20
for each additional evaporator, food heater, food filter, distiller
or water circulator
Survey of an installation for burning oil fuel $40 plus $20 for first
boiler, minimum
for every additional boiler
***
(A donlile-ended boiler is to be counted as two single-ended boilers).
Survey during construction of heaters and filters for use in connection
with oil fuel installations, for each item inspected.
Survey of one or two safety valves
-
-
-
**+
For every additional similar safety valve included in the same
order Inspection of finished manhole doors and compensating rings,-for
the first 15, or portion of 15, inspecfed at the same time.......
for each additional 15, or portion of 15, included in thej
same order and inspected at the same time
Test and Inspection of Steel and Other Materials when Certificates of Tests are not Produced.
Witnessing tests of steel or iron plutes of bars.-15 plates or bars, or
portion thereof, tested
--
Witnessing tests or steel or iron plates and burs included in one and the same order and made at the same works,-15 plates and bars in the aggreate, or portion thereof, tested ...
Witnessing special bending tests of a set plates, etc. (ie, testsi additional to those usually required by the Board of Trade),—for. 15 plates, or portion thereof, tested
Witnessing tests of steel forgings for an engine when all the forgings are made by the same maker, and not more than two visits by the Surveyor are required,-for 15 forgings, or portion thereof, tested
A door with its own ring is counted as one article, separate doors and rings as one each.
urf;S
5
10
5
24
20
10
12 0
20
20
12 3
20
20
Ordinance 10 of 1899.
Table C
For each additional visit beyond two made by the Surveyor in con-
nection with the tests of forgings, plates, bars, etc.
Inspection and tests of one or two steel Turnaces
for each additional fornace included in the same order Inspection and tests of one or two steel forgings, or steel castings for
slem stern-post, radder, etc., if made by the same maker
228
10
20
10
20
for each additional forging, or casting as the case may be, by
the same maker, included in the same order Witnessing tests of solid drawn steel steam pipes,-for each 15, or
portion of 15, tests of the material made
for each 30, or portion of 30, pipes tested by hydraulic pressure Inspection of wrought iron steam pipes, including hydraulic test,- for
each 15, or portion of 15, pipes inspected...
Inspection and tests of boiler tubes subject to external pressure;
Lapwelded iron tubes and lapwelded or solid drawn steel tubes for which a stress greater than that allowed for iron is not required, for the first 100, or part of 100, tubes for each succeeding 100, or part of 100, tubes
10
20
20
20
20
15
51
No comments yet.
Private notes are available after approval.