1964_IMPORT_AND_EXPORT_(STRATEGIC_COMMODITIES)_REGULATIONS — Page 82

HK Historical Laws 香港歷史法例 All AI Reviewed

G 82

CAP. 60

Import and Export (Strategic Commodities) Regulations

[1988 Ed.

[Subsidiary]

IL 1549

IL 1553

IL 1555

(c) Single-element encapsulated mercury-cadmium-telluride (HgCdTe) uncooled (295K ambient temperature operation) photo-electromagnetic (pem) or photo-conductive (pc) mode photo detectors with a peak sensitivity at a wavelength shorter than 11 000 nanometers.

Photomultiplier tubes, as follows——

(a) For which the maximum sensitivity occurs at wavelengths shorter than 300 nanometres,

Note:

Photomultiplier tubes specially designed for use in spectrophotometry having a peak sensitivity at a wavelength shorter than 300 nanometres are not covered by this sub-item.

(For photosensitive components, see Item IL 1548.)

(b) Having an anode pulse rise time of less than 1 nanosecond;

(c) Those which contain microchannel-plate electron multipliers.

Notes: 1.

Not used.

2. For microchannel-plate electron multipliers, see IL 1556.

Flash discharge type X-ray systems, including tubes, having all of the following characteristics-

(a) Peak power greater than 500 MW;

(b) Output voltage greater than 500 kV;

(c) Pulse width less than 0.2 microsecond.

Electron tubes, as follows, and specially designed components therefor-

(a) Electron tubes for image conversion or intensification, incorporating:

(1) Fibre-optic face-plates covered by Item IL 1556 (a);

(2) Microchannel-plate electron multipliers; or

(3) Gallium arsenide or other epitaxially grown semiconductor photocathodes covered by Item IL 1556 (c);

Note:

Nothing in this subitem shall be construed as sanctioning the export of technology for image intensifiers or converters incorporating fibre-optic face-plates or micro-channel-plate electron multipliers, or electron tubes for cameras incorporating such intensifiers converters.

(b) Electron tubes for television/video cameras:

(1) Incorporating fibre-optic face-plates covered by Item IL 1556 (a);

(2) Incorporating microchannel-plate electron multipliers; or

(3) Coupled with electron tubes covered by (a) above;

(c) Ruggedised electron tubes for television/video cameras having a maximum length-to-bulb diameter ratio of 5:1 or less.

Notes:

1. This Item does not cover:

(a) Commercial standard television/video camera tubes not incorporating fibre-optic face-plates covered by Item IL 1556 (a); or

(b) Commercial standard X-ray amplifier tubes.

2. Not used.

3. Not used.

4. Not used.

5. Not used.

Edit History

2026-05-04 20:09:17 · NVIDIA / meta/llama-4-maverick-17b-128e-instruct
Live
View comparison
AI Proofread
G 82 CAP. 60 Import and Export (Strategic Commodities) Regulations [1988 Ed. [Subsidiary] IL 1549 IL 1553 IL 1555 (c) Single-element encapsulated mercury-cadmium-telluride (HgCdTe) uncooled (295K ambient temperature operation) photo-electromagnetic (pem) or photo-conductive (pc) mode photo detectors with a peak sensitivity at a wavelength shorter than 11 000 nanometers. Photomultiplier tubes, as follows—— (a) For which the maximum sensitivity occurs at wavelengths shorter than 300 nanometres, Note: Photomultiplier tubes specially designed for use in spectrophotometry having a peak sensitivity at a wavelength shorter than 300 nanometres are not covered by this sub-item. (For photosensitive components, see Item IL 1548.) (b) Having an anode pulse rise time of less than 1 nanosecond; (c) Those which contain microchannel-plate electron multipliers. Notes: 1. Not used. 2. For microchannel-plate electron multipliers, see IL 1556. Flash discharge type X-ray systems, including tubes, having all of the following characteristics- (a) Peak power greater than 500 MW; (b) Output voltage greater than 500 kV; (c) Pulse width less than 0.2 microsecond. Electron tubes, as follows, and specially designed components therefor- (a) Electron tubes for image conversion or intensification, incorporating: (1) Fibre-optic face-plates covered by Item IL 1556 (a); (2) Microchannel-plate electron multipliers; or (3) Gallium arsenide or other epitaxially grown semiconductor photocathodes covered by Item IL 1556 (c); Note: Nothing in this subitem shall be construed as sanctioning the export of technology for image intensifiers or converters incorporating fibre-optic face-plates or micro-channel-plate electron multipliers, or electron tubes for cameras incorporating such intensifiers converters. (b) Electron tubes for television/video cameras: (1) Incorporating fibre-optic face-plates covered by Item IL 1556 (a); (2) Incorporating microchannel-plate electron multipliers; or (3) Coupled with electron tubes covered by (a) above; (c) Ruggedised electron tubes for television/video cameras having a maximum length-to-bulb diameter ratio of 5:1 or less. Notes: 1. This Item does not cover: (a) Commercial standard television/video camera tubes not incorporating fibre-optic face-plates covered by Item IL 1556 (a); or (b) Commercial standard X-ray amplifier tubes. 2. Not used. 3. Not used. 4. Not used. 5. Not used.
Baseline (Original)
G 82 CAP. 60 Import and Export (Strategic Commodities) Regulations [1988 Ed. [Subsidiary] IL 1549 IL 1553 IL 1555 (c) Single-element encapsulated mercury-cadmium-telluride (HgCdTe) uncooled (295K ambient temperature operation) photo-electromagnetic (pem) or photo- conductive (pc) mode photo detectors with a peak sensitivity at a wavelength shorter than 11 000 nanometers. Photomultiplier tubes, as follows—— (a) For which the maximum sensitivity occurs at wavelengths shorter than 300 nanometres, Note: Photomultiplier tubes specially designed for use in spectrophotometry having a peak sensitivity at a wavelength shorter than 300 nanometres are not covered by this sub-item. (For photosensitive components, see Item IL 1548.) (b) Having an anode pulse rise time of less than 1 nanosecond; (c) Those which contain microchannel-plate electron multipliers. Notes: 1. Not used. 2. For microchannel-plate electron multipliers, see IL 1556. Flash discharge type X-ray systems, including tubes, having all of the following characteristics- (a) Peak power greater than 500 MW; (b) Output voltage greater than 500 kV; (c) Pulse width less than 0.2 microsecond. Electron tubes, as follows, and specially designed components therefor- (a) Electron tubes for image conversion or intensification, incorporating: (1) Fibre-optic face-plates covered by Item IL 1556 (@); (2) Microchannel-plate electron multipliers; or (3) Gallium arsenide or other epitaxially grown semiconductor photocathodes covered by Item/IL 1556 (c); Note: Nothing in this subfitem shall be construed as sanctioning the export of technology for image intensifiers or converters incorporating fibre-optic face-plates or micro- channel-plate electron multipliers, or electron tubes for cameras incorporating such intensifiers converters. (b) Electron tubes for television/video cameras: (1) Incorporating fibre-optic face-plates covered by Item IL 1556 (a); (2) Incorporating microchannel-plate electron multipliers; or (3) Coupled with electron tubes covered by (a) above; (c) Ruggedised electron tubes for television/video cameras having a maximum length-to-bulb diameter ratio of 5:1 or less. Notes: 1. This Item does not cover: (a) Commercial standard television/video camera tubes not incorporating fibre-optic face-plates covered by Item IL 1556 (a); or (b) Commercial standard X-ray amplifier tubes. 2. Not used. 3. Not used. 4. Not used. 5. Not used.
2026-05-04 20:09:17 · Baseline
View content

G 82

CAP. 60

Import and Export (Strategic Commodities) Regulations

[1988 Ed.

[Subsidiary]

IL 1549

IL 1553

IL 1555

(c) Single-element encapsulated mercury-cadmium-telluride (HgCdTe) uncooled (295K ambient temperature operation) photo-electromagnetic (pem) or photo- conductive (pc) mode photo detectors with a peak sensitivity at a wavelength shorter than 11 000 nanometers.

Photomultiplier tubes, as follows——

(a) For which the maximum sensitivity occurs at wavelengths shorter than 300

nanometres,

Note:

Photomultiplier tubes specially designed for use in spectrophotometry having a peak sensitivity at a wavelength shorter than 300 nanometres are not covered by this sub-item.

(For photosensitive components, see Item IL 1548.)

(b) Having an anode pulse rise time of less than 1 nanosecond;

(c) Those which contain microchannel-plate electron multipliers.

Notes: 1.

Not used.

2. For microchannel-plate electron multipliers, see IL 1556.

Flash discharge type X-ray systems, including tubes, having all of the following characteristics-

(a) Peak power greater than 500 MW;

(b) Output voltage greater than 500 kV;

(c) Pulse width less than 0.2 microsecond.

Electron tubes, as follows, and specially designed components therefor- (a) Electron tubes for image conversion or intensification, incorporating:

(1) Fibre-optic face-plates covered by Item IL 1556 (@);

(2) Microchannel-plate electron multipliers; or

(3) Gallium arsenide or other epitaxially grown semiconductor photocathodes

covered by Item/IL 1556 (c);

Note:

Nothing in this subfitem shall be construed as sanctioning the export of technology for image intensifiers or converters incorporating fibre-optic face-plates or micro- channel-plate electron multipliers, or electron tubes for cameras incorporating such intensifiers converters.

(b) Electron tubes for television/video cameras:

(1) Incorporating fibre-optic face-plates covered by Item IL 1556 (a);

(2) Incorporating microchannel-plate electron multipliers; or

(3) Coupled with electron tubes covered by (a) above;

(c) Ruggedised electron tubes for television/video cameras having a maximum

length-to-bulb diameter ratio of 5:1 or less.

Notes:

1.

This Item does not cover:

(a) Commercial standard television/video camera tubes not incorporating

fibre-optic face-plates covered by Item IL 1556 (a); or

(b) Commercial standard X-ray amplifier tubes.

2.

Not used.

3.

Not used.

4.

Not used.

5.

Not used.

Comments

Approved members can add comments, bookmarks, and private notes.

No comments yet.

Private Research Note

Private notes are available after approval.