10
Purpose or service.
Fees.
Purpose or service.
Fees.
$
(b) For examination of engines (including shafting). stoum reciprocating or internal combustion, în ons ship, having a total of---
(1) 100 circular inches or under
150.00
✪ above 100 and including 250 circular
inches
200.00
(iii) above 250 and including 500 circular
40.00
inches
350.00
400.00
(v) above 300 and including 1,000 circular
inches
600,00
(v) for every additional 1,000 circular inches
or part thereof
Note: "Circular inches” means the sum of the squares of the engine cylinder diameters (measured in inches)
4. For survey of engines, steam turbines, etc.-
200,00
C. SURVEYS OF BOILERS AND MACHINERY.
The following fees shall be payable-
1. For the survey of boilers intended for use on board
ship-
(a) For one double-ended cylindrical boiler, per foot, or part of a foot of the total width of the fumaces
Minimum fee
(b) For one single-ended cylindrical boiler, per foot, or part of a foot, of the total width of the furnaces
Minimum fce
(c) For one water tube boiler, per foot or part of
a fool, of the total width of the furnaces Minimum fee
(4) For survey of each additional boiler ordered at the same time to the same design of the same makers
{e} _For_te-survey when no inspection of plana ja
involved
60.00 300.00
50.00
300.00
Note: These fees include inspection of the drawings and the survey of the boilers up to and in- cluding the bydraulic test.
2 For surveys of bojler parts, machinery, etc...
(a) Air receivers or welded pressure vessels up to
13 cu. ft. capacity each
(b) Each additional unit in the same order
100.00
50.00
(4) Engines, steam turbines, ja one ship, baving
total of 1,000 sh.p. or under
650.00
of the fee at (ơ) (8) or (c)
Total fee as at (a), (b)
(6) For every additional 1,000 s.h.p. or part thereof. 200.00 (c) For every additional visit above two and a
150,00
or (c) less $200.00 06- ject to the minimum fec being payable.
(d) Evaporator, each unit
150.00
(2) Main gearing: any one main pinion and
associated main gear wheel
400.00
(†) Any one main pinion only
250.00
() One main thrust shaft with assoclated main
tonel shafting
400,00
(4) Propeller, propeller shaft and stern tube
400.00
Note: (0) Where any two of items (2). (f), (g) or (h) are combined the total fee shall be $600.00.
(c) Air receivers or welded pressure vessels over
15 cu. ft capacity each
200,00
(d) Auxiliary unit, such as feed heater or filter, distiller, pump, etc. but excluding oil foc] beaters and Elten; each item
100.00
(2) If parts of boilers and machinery are eventually installed in a ship under survey for
a passenger certificate the fee will be regarded as part of the survey fee.
5. For survey of oil fuel burning installations-
(e) Boiler mountings for one boiler
2:00.00
() For every additional similar set in the same
order
(4) Oil fuel bucaing installation only, per boiler- room but not including boiler front arrange-
100.00
Inents
260.00
(g) Electric generators and motors including test
of material
(6) Boiler front arrangement, per boiler front
120.00
200.00
(A) Electric generators and motors excluding test
of material
140.00
(0) Main switchboard
breaker
tesla-per main circuit
(c) Oil fuel tanks, double bottom tanks, or other tanks forming part of the ship's structure and intended for storage of oil fuel, or water ballast, or fresh water, per tank
400.00
100.00
Similar tanks not forming part of the ship's structure, per tank
160.00
3. For acceptance as standard type of engines, internal
combustion up to 150 B.H.P
(a) For examination of design and inspection of first engine made to the design and the issue of a certificate of tes!
(d) Cofferdam spaces forming part of the ship's
structure, per cofferdam
200.00
------
400.00
(e) DII fuel heaters and filters for use in connexion
with oil fuel installations, each item
50.00