介
2-1991
15:57
FROM
TO
01144712703386 P.06
Bermuda Sun, Friday, hech 14, 1986.
vised or re-issued
pplied for use at
it container to be
egulation 6;
of that container;
e consistent with e, except that if then compliance
shall, so far as is
lation 6; and e consistent with e, except that if then compliance
the bailee shall ined, the bailee that -
-
f that container. ing to be used a egulation 5 that an organisation ion and such alt given.
g a container to the time of the ner and -
ut or lease that suring that the
onsible for en-
in express term suring that the
r bailment and
SCHEDULE (Regulations 2 and 6)
1. The safety approval plate required by regulation 6 shall be permanently fixed to the container in a position such that it is-
(a) readily visible; and
(b) adjacent to any other officially approved plate carried on the container; and (c) not likely to be easily damaged.
2. The safety approval plate shall -
(a) be in the form prescribed by figure I of this Schedule;
(b) consist of a permanent, non-corroding, fireproof, rectangular plate measuring not less than 200min by 100mın;
(c) be marked with
(i) the legend "CSC Safety Approval" in letters of at least 8mm in height; and
(ii) the other legends and information prescribed by sub-paragraph (d) and by figure 1 of this Schedule in letters of at least 5mm in height;
and such markings shall be permanent, clear and legible and in at least the English or French language, but nothing in this sub-paragraph shall prevent any markings for the purposes of an examination scheme or programme being by means of a decal; (d) contain the following information in at least the English or French language - (i) line 1 - the country of approval and approval reference;
(ii) line 2 - the month and year of manufacture;
(iii) line 3 - the manufacturer's identification number in respect of the container, or in the case of containers for which that number is unknown the owner's identifica- tion number, or the number allotted by the Government or organisation which has granted the approval;
(iv) line 4 - the maximum gross weight in kilograms and pounds;
(v) line 5 - the allowable stacking weight for 1.8g in kilograms and pounds (that is to say, the designed maximum superimposed static stacking weight);
(vi) line 6 - the transverse racking test load value in kilograms and pounds;
(vil) line 7 - the end wall strength value as a proportion of the maximum permissible payload, which shall not be entered unless the end walls are designed to withstand a load of less or more than 0.4 times the maximum permissible payload;
(vili) line 8 - the side wall strength value as a proportion of the maximum permissible payload, which shall not be entered unless the side walls are designed to withstand a load of less or more than 0.6 times the maximum permissible payload;
(ix) line 9 - on and after 1st January 1987 (if the approved examination scheme or programme so requires) -
(a) a legend indicating that the container is subject to a continuous examination pro- gramme; or
(b) the date (expressed in month and year only) before which the container shall next be thoroughly examined.
Lines 7 and 8 may be used for the above purposes (a) and (b) if they are not required to contain other information.
Figure 1
ailee should be
ng to a design
1
3
[cordance with
ccepted or ap-
5
6
7
ger valid; or vhether or no!
8
(1).
considers ap-
a)(ii) and any
e and may be
CSC SAFETY APPROVAL
Made the 7th day of March 1986.
DATE MANUFACTURED
IDENTIFICATION Nọ.
1
MAXIMUM GROSS WEIGHT kg lb ALLOWABLE STACKING WEIGHT FOR 1.8g ...
lb RACKING TEST LOAD VALUE kg lb
kg
: