THROUGHOUT THE WORLD
OMARK
QUALITY TOOLS
ARE MAKING
CONSTRUCTION WORK
FASTER, EASIER
AND LESS EXPENSIVE
Equipment for drilling, cutting and fastening to structural steel, concrete, masonry.
OMARK DRILLING MACHINES
FOR CONCRETE, MASONRY
OMARK CONCRETE, MASONRY SAWS
DIAMOND & ABRASIVE BLADES
OMARK self-propelled concrete saws use long lasting diamond or abrasive blades for fast, economical sawing of asphalt and concrete on highways, airports, concrete floors, etc.
OMARK masonry saws cut all types of masonry smoothly and accurately.
OMARK Drilling machine bores clean holes in toughest reinforced concrete from " to 12" in diameter. OMARK diamond bits available in three types from " to 14" in diameter,
DIAMOND BITS
An easily installed
OMARK truck-mounted drill is ideally suited for highway test coring and
installation of road signs.
OMARK GRAMWELD
PERCUSSIVE STUD WELDING
MACHINES AND STUDS
The OMARK percus- sive stud welding sys- tem welds inexpensive small OMARK studs to thin metal without burn-through or dis- tortion. The method is suitable for ductwork, building and tank insu- lation, roofing, siding, etc.
7777
DRIVE-IT®
POWDER OPERATED TOOLS AND DRIVEPINS
Hand operated, self powered tool, anchors anything fast, economically and securely to concrete or steel. Several models. All use special pow- derloads and Drivepins. Pins available from 1" to 6" long in threaded, headed and eye- let types.
HAMMER DRIVE MANUAL FASTENING TOOL
Hammer Drive tools concentrate the force of a hammer blow to drive hardened steel drivepins securely into concrete or steel. No cartridges, power or air needed. Safe, econom- ical and easy to use.
QUALIFIED TECHNICIANS ARE AVAILABLE TO PROVIDE SPECIFIC APPLICATION ASSISTANCE. PLEASE CONTACT YOUR LOCAL OMARK TECHNICAL REPRESENTATIVE OR OMARK TECHNICAL CENTER IN THE U.S.A.
Limited Dealerships Available
OMARK CONCRETE DRILL ANCHORS
Six types of self-drilling and non-drilling expansion an- chors for concrete. Easy to install with an air, electric or hand hammer. Gives strong, vibration-proof fastenings. that resist high pullout loads.
OMARK INTERNATIONAL, LTD.
2100 S. E. Milport Road Portland 22, Oregon Dept. 501
THE HONG KONG & FAR EAST BUILDER—VOLUME 18, NUMBER 3
55
55
Page 60Page 61