EKMAN & CO., LTD., 1016 UNION HOUSE, HONG KONG
SELF-DRILLING ANCHORS
The world's most dependable concrete anchors. Ideally suited for anchoring to concrete floors, walls and ceil- ings. Installed with standard impact tools or by hand.
A NEW, SHARP DRILL FOR EVERY HOLE!
PHILE!
RED HEAD SNAP-OFF ANCHOR
For floor, wall or ceiling installation of pipes, machinery, etc. Install with an impact hammer or Holder/Driver.
PHIL. PS: Redd"
FAST INSTALLATION
1
2
3
DRILL THE HOLE
RED HEAD
PHILLIPO ANCHORS
Each anchor is a high speed, self-drilling, hollow core drill that converts to an an- chor after the hole is complete.
EXPAND THE ANCHOR
Reinsert drill with red plug, then trigger the hammer to expand anchor. RED HEAD undercuts the bottom of the hole... can't creep, shake or pull loose.
BOLT
Snap off chuck and bolt object. Result: dependable holding power, unmatched performance.
RED HEAD FLUSH ANCHOR
For work where hand installation is desired. Install with FH-300 Flush/Holder.
Red H
No. Size Depth
Cat. Bolt Thread in Con-
Depth Pull
Out*
Shear*
crete
Load
Load
"
S-14.
ジャ 1
4,000
1,363 #
S-16. is"
15
1."
4,425
2,073
H
S-38
1"
6,175# 3.443
S-12
24"
2,260# 6,856
S-58-%%
152"
215"
2760|12.153
||17.675# 16.516#
S-34+ " 12" 31⁄4"
S-78⚫
3
19,440 18,816
Depth
Pull
Cat. Bolt Thread
No. Size
F-14 X"
F-16.
in Con- Depth crete
Out*
Shear*
Load
Load
17" 11⁄4"
4,000
1,363 #
P
*/" 1742"
4,425#| 2,073÷
F-38.
1/4"
1."
6,175# 3,443#
F-12
"
1',"
9,260# 6,856#
F-58.
X"
23/4"
F-34⚫
%"
11
3′′
12,760 12.153#
17,675
16,516#|
. Listed by
and
*For 4:1 safety factor use 25% of above capacities in 3500 p. s. i. concrete. RED HEADS are also available in Tie-Wire and Rod Hanger types.
COST SAVING WAY...
Installation
of 100 1⁄4"
Anchors
None
Red Head Snap-off Anchors
Lead Anchors
Cost of Anchors
$11.07
$ 6.96
Cost of Explosives
None
None
$10.50 $ 5.10
Explosive
Powder Preset Studs Inserts
$23.00 None
Drills Required
None
1/2"
None
Cost of 3 Carbide
Drills
None
$ 9.09
None
None
Total Installation
Time
75 min.
75 min.
*Cost of Labor
Total Cost
$ 4.38
$15.45
$ 4.38
60 min. $ 3.50
540 min. $31.50
$20.43
$19.10
$54.50
*Based on $3.50 Hourly rate (installed with power tools).
• Install with any make or model electric or air impact hammer.
• Each anchor drills its own hole, assuring precise fit and uniform high holding power.
• Shock and vibration-proof. Exclusive undercutting ac- tion prevents loosening.
+
• Precision machined and heat treated to exacting standards backed by written factory guarantee.
SELF-DRILLING ANCHOR ACCESSORIES Phillips Patented Interchangeable Chuck System for installing RED HEADS with any impact hammer.
Phillips make a chuck shank for every hammer, a chuck head for every RED HEAD size. When ordering complete assembly, state size and type of RED HEAD and make and model of hammer.
CHUCK SHANK
CHUCK HANDLE H-128
DRIFT PIN X-158
EJECTOR KEY EK-12
1/4"
E-500 Overhead Extension
Fits RED HEAD "K" series hammers. Makes overhead work easy. Optional U-600 adapter converts for use with most other hammers.
"
CHUCK HEADS 1/2"
"
"
"
HL-14
HL-16
HL-38
HL-12
HL-58
HL-34
HL-78
Holder/Driver
SH-300
For fast hand instal- lation of all RED HEAD Snap-off and Tie Wire An- chors. Used with RED HEAD Chuck Heads.
Flush/Holder FH-300 series For fast installation of Phillips RED HEAD Flush and Rod Hanger Anchors. Holder/Driver screws into anchor.
K-457 ELECTRIC IMPACT HAMMER KIT Complete with acces- sories illustrated. UL, CSA approved. 110 volts (available for 220 volts). Without accessories,
K457-WK.
EKMAN & CO., LTD., P. O. BOX 22063, TAIPEI, TAIWAN