RASHKB Journal 皇家亞洲學會香港分會學刊 | RAS-1988 https://digitalrepository.lib.hku.hk/catalog/ft84gb83q Meanwhile the Far East Flying Training School (the original name) commenced training pilots and engineers for civil aviation in 1934.10 The Far East Flying and Technical School Limited, as it was later named, was a private institution. It closed in 1983. The first Government post-secondary technical institution was the Trade School which opened in Wood Road, on Hong Kong Island, in 1937, on a site adjacent to that on which Morrison Hill Technical Institute now stands. At the time of opening, under Principal George White, it ran courses in building, mechanical engineering, and marine-wireless operating. The college also took over the evening practice courses previously run by Taikoo Dockyard. The new, then two-storey (an additional floor was completed in 1953), Trade School building in Wanchai, was well constructed and was one of the few examples of good face-brick-work in the Colony. (It was demolished in 1988, seven years after becoming an annexe of the Morrison Hill Technical Institute.)* Thus, when the Pacific War broke out in 1941, technical education was being provided at secondary, trade-school, and post-secondary levels, but not on a large scale. For example, there were about 200 full-time students attending post-secondary courses at the Trade School. This did not receive a great deal of support from employers except from the dockyards and the members of the Building Contractors' Association. During the Japanese occupation (December 1941 to August 1945) oral history has it that the equipment was moved away and the Trade School building was used for a period as an opium factory. In 1947, after World War II the Trade School (renamed Technical College in 1947), the Junior Technical School, the Aberdeen Trade School, and a number of centres running evening classes in technical subjects, reopened and were soon working at pre-war capacity. To this group was added the Tang King-po Secondary School, in Kowloon, in 1953. For many years this had a trade school section which organised classes in printing, shoemaking and tailoring.11 This section was phased out in the late 1970s. *Please see Plate 1. ================================================================================ RASHKB Journal 皇家亞洲學會香港分會學刊 | RAS-1997 https://digitalrepository.lib.hku.hk/catalog/wp98g7579 81 A LOOK BACK : CIVIL ENGINEERING IN HONG KONG 1841-1941 Preface C. MICHAEL GUILFORD This brief wide-ranging general article written as a contribution to mark the 50th Anniversary of the founding of the Hong Kong Institution of Engineers (from 1947-1975, The Engineering Society of Hong Kong). It was originally published in three parts in Asia Engineer, the Journal of the Hong Kong Institution of Engineers (July, August and September 1997). In this reprint, the opportunity has been taken to make minor corrections, mainly typographical, and to add 17 illustrations which should make the article more interesting. The author would like to express his thanks to Henderson & Associates, the publishers of Asia Engineer, for their kind agreement for the article to be reprinted in the Journal. Introduction Before the British arrived in 1841 the population on Hong Kong Island, who lived in or around 20 small villages, was less than 6,000 (about a third being afloat), whilst in Kowloon there were probably around 2,000 souls and, in the New Territories (then part of San On district) about 100,000 persons living in some 600 villages. At this time granite quarrying around the harbour was a thriving industry (for example at Quarry Bay and Hok Un), much of it being used locally with some being exported by boat to Canton (Guangzhou). The abundance of old lime kilns around the seashore indicates that there was no shortage of lime for the production of cementing material. Civil engineering works were generally simple and geared to meet the needs of the rural and fishing communities. As a result a network of rural paths, some paved with granite setts, and footbridges were constructed, an example of the latter being the existing Pin Mo Bridge at Shui Tau (near Kam Tin) which was built in 1710 (49th year of K'ang Hsi), a simple twin-span structure with the decking formed by ================================================================================ RASHKB Journal 皇家亞洲學會香港分會學刊 | RAS-1997 https://digitalrepository.lib.hku.hk/catalog/wp98g7579 96 The Shing Mun Valley scheme was started in 1923 and initially a 2km-long 3m-diameter tunnel was driven to Shek Lai Pui. Subsequently, the largest pre-Pacific war reservoir was constructed, which was to double the Territory's total water storage capacity to 27,000 million litres; it was formed by the main Gorge Dam, which was the highest in the old British Empire at that time (1936), and the subsidiary 25m-high earth/rockfill/concrete core Pineapple Pass Dam. The remarkable Gorge Dam, 85m high with a bold and probably unique design, consists of a downstream shoulder of rockfill faced with pitching and an upstream face comprising a slender near-vertical reinforced concrete diaphragm wall supported by a massive concrete thrust block. Between the upper part of the thrust block and the downstream rockfill, there is a narrow wedge filled with sand for the purpose of taking up any settlement of the rockfill and to cater for possible earthquake movement. Any leakage through the upper part of the diaphragm can be observed from an inspection gallery behind it. Elaborate experiments were made to determine the correct design of the reservoir overflow bellmouth in order to reduce vortexing and to neutralise the destructive vacuum forces which could occur at the base of the bellmouth overflow shaft. For this investigative work, the young Geoffrey Binnie was awarded a Telford premium by the Institution of Civil Engineers. Subsequently, preliminary investigations for the Tai Lam Chung scheme were started shortly before the outbreak of the Pacific war, by which time the Territory's population had risen to about 1.6 million. As a result of an acute water emergency on the Island, work started on a 300mm steel pipe cross-harbour main in 1929, the sixty-two 30m-long bolted sections taking less than 2 months to lay, and a further 450mm main was laid in 1935. Due to corrosion problems, it was necessary to replace these pipes in 1939 with two 530mm steel pipes, protected with a 12mm-thick cement lining on the inside and a 60mm coating of vibrated concrete on the outside, which were laid on reinforced concrete blocks bedded on rockfill with a protective rubble mound on the east side of the pipelines to prevent damage from dragging anchors. These pre-Pacific war water schemes not only involved building dams but also needed construction, often in difficult site conditions, of a multiplicity of extensive catchwaters, tunnels, trunk mains, treatment plants, service reservoirs, pumping stations, and distribution mains in ================================================================================ RASHKB Journal 皇家亞洲學會香港分會學刊 | RAS-2000 https://digitalrepository.lib.hku.hk/catalog/nk328168n 214 A Brief History of Technical Education in Hong Kong School (VTS), that a new curriculum was phased in. It changed from being a trade school and became a secondary technical school. Meanwhile the Far East Flying Training School -- the original name -- commenced training pilots and engineers for the civil aviation industry in 1934. The Far East Flying and Technical School Limited, as it was later renamed, sited at Kai Tak, was a private institution. It shut its doors in 1983 because of the rapid expansion of government-sponsored technical education. Meanwhile, retracing our steps, further progress in the field of technical education was made pre-World War Two when, in 1935, the Salesian Society founded the Aberdeen Trade School. This provided a sound general education, together with training considered to be comparable to an apprenticeship. Like the JTS, this School too was converted into a secondary technical school in the late 1950s. I recall visiting the Aberdeen Trade School on its open day, in January 1955, when I was struck by the high standard of craftsmanship of the students' work on display. The first Government post-secondary technical institution was the old Trade School which opened in Wood Road, Wan Chai (using the old spelling), in 1937. It stood on the corner where the Vocational Training Council's multi-storey office block stands today. At the time of opening, under Principal George White, it ran courses in building, mechanical engineering (with a bias towards automobile engineering) and marine wireless operating. The Trade School also took over the evening classes previously run by Taikoo Dockyard at Quarry Bay. The new, then two-storey (an additional floor was added in 1953) Trade School was well constructed on the lines of other colonial-style buildings erected between the two World Wars. It had high ceilings with paddle-fans because there was virtually no air-conditioning in Hong Kong at that time (an exception was the Hong Kong and Shanghai Bank). The Trade School was one of the few examples of good face brickwork. In the 1950s navigation, commerce and textile ================================================================================