RAS-1990 — Page 325

RASHKB Journal 皇家亞洲學會香港分會學刊 All AI Reviewed

302

NOTES

L

This same carver also referred to the Fukienese Pestilence Wang Yeh as "pan-shen pan-kuei" (Note 1: Page 59 of Vol 29: 1989 Journal) as they too are neither gods nor demons, but 'humans of the other world'.

See Plates 7-9.

THE MAKING OF A HUSK-GRINDER

Mr Chung Yick Ming, the Chairman of Tai Po Rural Committee took me to see Mr Chung Koon Tai (#) who is a villager of Chung Uk Village in Lam Tsuen Valley in Tai Po, New Territories.

Mr Chung Koon Tai is now 76 years old. He first joined the trade of husk-grinder (A) making when he was 16 years old as an apprentice. His teacher was a fellow clansman. He retired in 1980. He also got an apprentice to succeed to the craft of husk grinder making. Because of the decline of rice farming in the New Territories since the 60's, the apprentice could not find a living with his profession, and therefore has migrated to UK.

In those golden days of husk-grinder making, Mr Chung received orders for grinder making from villages all over the New Territories. He had to travel to these villages on foot and stayed there for three to four days to make a husk-grinder. He also made husk-grinders for rice-grinding shops (*) in the old market towns in Tai Po, Yuen Long and Tuen Mun. Chan Yat Sun (H), the former Heung Yee Kuk Chairman, was also his customer when he owned a rice-grinding shop in the town of old Castle Peak (Tuen Mun today).

There used to be two skilled workers working together to make a husk-grinder. When they arrived at the village, they first went to find some bamboo which was available almost everywhere in the New Territories. They cut down some bamboo and then stripped the bark off layer by layer into long narrow pieces of a quarter to a half inch wide. They then wove these long narrow bamboo strips into the upper and lower parts of the outer framework of the grinder, which looked like two empty baskets. The upper part was fixed with a wooden handle and a wooden funnel which helped the grain to go to the grinding surface. The lower part was also fixed with an axis of iron in the centre.

Edit History

2026-05-13 06:17:40 · NVIDIA / meta/llama-4-maverick-17b-128e-instruct
Live
View comparison
AI Proofread
302 NOTES L This same carver also referred to the Fukienese Pestilence Wang Yeh as "pan-shen pan-kuei" (Note 1: Page 59 of Vol 29: 1989 Journal) as they too are neither gods nor demons, but 'humans of the other world'. See Plates 7-9. THE MAKING OF A HUSK-GRINDER Mr Chung Yick Ming, the Chairman of Tai Po Rural Committee took me to see Mr Chung Koon Tai (#) who is a villager of Chung Uk Village in Lam Tsuen Valley in Tai Po, New Territories. Mr Chung Koon Tai is now 76 years old. He first joined the trade of husk-grinder (A) making when he was 16 years old as an apprentice. His teacher was a fellow clansman. He retired in 1980. He also got an apprentice to succeed to the craft of husk grinder making. Because of the decline of rice farming in the New Territories since the 60's, the apprentice could not find a living with his profession, and therefore has migrated to UK. In those golden days of husk-grinder making, Mr Chung received orders for grinder making from villages all over the New Territories. He had to travel to these villages on foot and stayed there for three to four days to make a husk-grinder. He also made husk-grinders for rice-grinding shops (*) in the old market towns in Tai Po, Yuen Long and Tuen Mun. Chan Yat Sun (H), the former Heung Yee Kuk Chairman, was also his customer when he owned a rice-grinding shop in the town of old Castle Peak (Tuen Mun today). There used to be two skilled workers working together to make a husk-grinder. When they arrived at the village, they first went to find some bamboo which was available almost everywhere in the New Territories. They cut down some bamboo and then stripped the bark off layer by layer into long narrow pieces of a quarter to a half inch wide. They then wove these long narrow bamboo strips into the upper and lower parts of the outer framework of the grinder, which looked like two empty baskets. The upper part was fixed with a wooden handle and a wooden funnel which helped the grain to go to the grinding surface. The lower part was also fixed with an axis of iron in the centre.
Baseline (Original)
302 NOTES L This same carver also referred to the Fukienese Pestilence Wang Ych as "pan-shen pan-kuei (Note 1: Page 59 of Vol 29: 1989 Journal) as they too are neither gods nor demons, but 'humans of the other world'. See Plates 7-9. THE MAKING OF A HUSK-GRINDER Mr Chung Yick Ming, the Chairman of Tai Po Rural Committee took me to see Mr Chung Koon Tai (#) who is a villager of Chung Uk Village in Lam Chuen Valley in Tai Po, New Territories. Mr Chung Koon Tai is now 76 years old. He first joined the trade of husk-grinder (A) making when he was 16 years old as an apprentice. His teacher was a fellow clansman. He retired in 1980. He also got an apprentice to succeed to the craft of husk grinder making. Because of the decline of rice farming in the New Territories since the 60's, the apprentice could not find a living with his profession, and therefore has migrated to UK. In those golden days of husk-grinder making, Mr Chung received orders for grinder making from villages all over the New Territories. He had to travel to these villages on foot and stayed there for three to four days to make a husk-grinder. He also made husk- grinders for rice-grinding shops (*) in the old market towns in Tai Po, Yuen Long and Tuen Mun. Chan Yat Sun (H), the former Heung Yee Kuk Chairman, was also his customer when he owned a rice-grinding shop in the town of old Castle Peak (Tuen Mun today). There used to be two skilled workers working together to make a husk-grinder. When they arrived at the village, they first went to find some bamboo which was available almost everywhere in the New Territories. They cut down some bamboo and then stripped the bark off layer by layer into long narrow pieces of a quarter to a half inch wide. They then wove these long narrow bamboo strips into the upper and lower parts of the outer framework of the grinder, which looked like two empty baskets. The upper part was fixed with a wooden handle and a wooden funnel which helped the grain to go to the grinding surface. The lower part was also fixed with an axis of iron in the
2026-05-13 06:17:40 · Baseline
View content

302

NOTES

L

This same carver also referred to the Fukienese Pestilence Wang Ych as "pan-shen pan-kuei (Note 1: Page 59 of Vol 29: 1989 Journal) as they too are neither gods nor demons, but 'humans of the other world'.

See Plates 7-9.

THE MAKING OF A HUSK-GRINDER

Mr Chung Yick Ming, the Chairman of Tai Po Rural Committee took me to see Mr Chung Koon Tai (#) who is a villager of Chung Uk Village in Lam Chuen Valley in Tai Po, New Territories.

Mr Chung Koon Tai is now 76 years old. He first joined the trade of husk-grinder (A) making when he was 16 years old as an apprentice. His teacher was a fellow clansman. He retired in 1980. He also got an apprentice to succeed to the craft of husk grinder making. Because of the decline of rice farming in the New Territories since the 60's, the apprentice could not find a living with his profession, and therefore has migrated to UK.

In those golden days of husk-grinder making, Mr Chung received orders for grinder making from villages all over the New Territories. He had to travel to these villages on foot and stayed there for three to four days to make a husk-grinder. He also made husk- grinders for rice-grinding shops (*) in the old market towns in Tai Po, Yuen Long and Tuen Mun. Chan Yat Sun (H), the former Heung Yee Kuk Chairman, was also his customer when he owned a rice-grinding shop in the town of old Castle Peak (Tuen Mun today).

There used to be two skilled workers working together to make a husk-grinder. When they arrived at the village, they first went to find some bamboo which was available almost everywhere in the New Territories. They cut down some bamboo and then stripped the bark off layer by layer into long narrow pieces of a quarter to a half inch wide. They then wove these long narrow bamboo strips into the upper and lower parts of the outer framework of the grinder, which looked like two empty baskets. The upper part was fixed with a wooden handle and a wooden funnel which helped the grain to go to the grinding surface. The lower part was also fixed with an axis of iron in the

Comments

Approved members can add comments, bookmarks, and private notes.

No comments yet.

Private Research Note

Private notes are available after approval.