RAS-1969 — Page 76

RASHKB Journal 皇家亞洲學會香港分會學刊 All AI Reviewed

70

W. SCHOFIELD

time sand diggers had cut through the sandbank, the cliff was divided into sections by their activities, and objects could be and were photographed in groups. A sketch of the section was made showing the relative position of each object, its number in the group, and its depth; each piece was extracted; its number, depth, reference letter of the section, and date of the photo were recorded on the wrapping paper, and later in Chinese ink on each object. The sketch-map at Fig. 1 shows the relative positions of the sections, lettered from A to Q.

OBJECTS FOUND:

A. IMPLEMENTS AND OTHER OBJECTS OF STONE (See Plate 3) 1. Found at known levels:

Triangular hand hoe very roughly flaked to shape, and worn on one point. Made from a water-worn pebble of quartz-felsite, imported to the island. From sector K, depth 132 cm.

Part of ring of dark gray dyke rock, roughed out but unfinished: either broken in the making, or put with a corpse as a cheap substitute for a well-made ornament: too small for a bracelet except for a small child. From west cliff, depth 107 cm.

Part of quartzite ring, polished, levelled at edge of perforation, and with vertical outer edge, 7 mm. thick. From sector C, 89 cm.

2. Found loose: sectors known:

From sector I; grooved piece of hard reddish sandstone, evidently for smoothing such objects as arrow shafts. All grooves are 7 mm. in diameter, and are found on all surfaces of the stone. It could have been obtained from the coast of Lantau near Tai O.

Broken portion of large polished and shouldered adze: 4 cm. of the tang and 3 cm. of the body on one side remain. The shoulder has been hollowed out in part by pecking. The material is a fine-grained acid rock, probably from one of the many dykes of that type in the Lantau hills; it appears to have abundant small muscovite crystals.

From sector K: part of a roughed-out 'blank' for making what may have been intended for a shouldered adze. The edges appear to have been hammered to produce a secondary flaking, and possibly an unlucky blow split the stone and the worker threw it away.

From hillside above sector L: an implement originally formed as a polished adze, with curved edge making an angle with the rounded sides, and later blunted by wear and discarded. Later

Edit History

2026-05-12 17:46:07 · NVIDIA / meta/llama-4-maverick-17b-128e-instruct
Live
View comparison
AI Proofread
70 W. SCHOFIELD time sand diggers had cut through the sandbank, the cliff was divided into sections by their activities, and objects could be and were photographed in groups. A sketch of the section was made showing the relative position of each object, its number in the group, and its depth; each piece was extracted; its number, depth, reference letter of the section, and date of the photo were recorded on the wrapping paper, and later in Chinese ink on each object. The sketch-map at Fig. 1 shows the relative positions of the sections, lettered from A to Q. OBJECTS FOUND: A. IMPLEMENTS AND OTHER OBJECTS OF STONE (See Plate 3) 1. Found at known levels: Triangular hand hoe very roughly flaked to shape, and worn on one point. Made from a water-worn pebble of quartz-felsite, imported to the island. From sector K, depth 132 cm. Part of ring of dark gray dyke rock, roughed out but unfinished: either broken in the making, or put with a corpse as a cheap substitute for a well-made ornament: too small for a bracelet except for a small child. From west cliff, depth 107 cm. Part of quartzite ring, polished, levelled at edge of perforation, and with vertical outer edge, 7 mm. thick. From sector C, 89 cm. 2. Found loose: sectors known: From sector I; grooved piece of hard reddish sandstone, evidently for smoothing such objects as arrow shafts. All grooves are 7 mm. in diameter, and are found on all surfaces of the stone. It could have been obtained from the coast of Lantau near Tai O. Broken portion of large polished and shouldered adze: 4 cm. of the tang and 3 cm. of the body on one side remain. The shoulder has been hollowed out in part by pecking. The material is a fine-grained acid rock, probably from one of the many dykes of that type in the Lantau hills; it appears to have abundant small muscovite crystals. From sector K: part of a roughed-out 'blank' for making what may have been intended for a shouldered adze. The edges appear to have been hammered to produce a secondary flaking, and possibly an unlucky blow split the stone and the worker threw it away. From hillside above sector L: an implement originally formed as a polished adze, with curved edge making an angle with the rounded sides, and later blunted by wear and discarded. Later
Baseline (Original)
70 W. SCHOFIELD time sand diggers had cut through the sandbank, the cliff was divided into sections by their activities, and objects could be and were photographed in groups. A sketch of the section was made showing the relative position of each object, its number in the group, and its depth; each piece was extracted; its number, depth, reference letter of the section, and date of the photo were recorded on the wrapping paper, and later in Chinese ink on each object. The sketch-map at Fig. 1 shows the relative positions of the sections, lettered from A to Q. OBJECTS FOUND: A. IMPLEMENTS AND OTHER OBJECTS OF STONE (See Plate 3) 1. Found at known levels: Triangular hand hoe very roughly flaked to shape, and worn on one point. Made from a water-worn pebble of quartz-felsite, imported to the island. From sector K, depth 132 cm. Part of ring of dark gray dyke rock, roughed out but un- finished: either broken in the making, or put with a corpse as a cheap substitute for a well-made ornament: too small for a bracelet except for a small child. From west cliff, depth 107 cm. Part of quartzite ring, polished, levelled at edge of perforation, and with vertical outer edge, 7 mm, thick. From sector C, 89 cm. 2. Found loose: sectors known: From sector I; grooved piece of hard reddish sandstone, evidently for smoothing such objects as arrow shafts. All grooves are 7 mm. in diameter, and are found on all surfaces of the stone. It could have been obtained from the coast of Lantau near Tai O. Broken portion of large polished and shouldered adze: 4 cm. of the tang and 3 cm. of the body on one side remain. The shoulder has been hollowed out in part by pecking. The material is a fine-grained acid rock, probably from one of the many dykes of that type in the Lantau hills; it appears to have abundant small muscovite crystals. From sector K: part of a roughed-out 'blank' for making what may have been intended for a shouldered adze. The edges appear to have been hammered to produce a secondary flaking, and pos sibly an unlucky blow split the stone and the worker threw it away. From hillside above sector L: an implement originally formed as a polished adze, with curved edge making an angle with the rounded sides, and later blunted by wear and discarded. Later
2026-05-12 17:46:07 · Baseline
View content

70

W. SCHOFIELD

time sand diggers had cut through the sandbank, the cliff was divided into sections by their activities, and objects could be and were photographed in groups. A sketch of the section was made showing the relative position of each object, its number in the group, and its depth; each piece was extracted; its number, depth, reference letter of the section, and date of the photo were recorded on the wrapping paper, and later in Chinese ink on each object. The sketch-map at Fig. 1 shows the relative positions of the sections, lettered from A to Q.

OBJECTS FOUND:

A. IMPLEMENTS AND OTHER OBJECTS OF STONE (See Plate 3) 1. Found at known levels:

Triangular hand hoe very roughly flaked to shape, and worn on one point. Made from a water-worn pebble of quartz-felsite, imported to the island. From sector K, depth 132 cm.

Part of ring of dark gray dyke rock, roughed out but un- finished: either broken in the making, or put with a corpse as a cheap substitute for a well-made ornament: too small for a bracelet except for a small child. From west cliff, depth 107 cm.

Part of quartzite ring, polished, levelled at edge of perforation, and with vertical outer edge, 7 mm, thick. From sector C, 89 cm.

2. Found loose: sectors known:

From sector I; grooved piece of hard reddish sandstone, evidently for smoothing such objects as arrow shafts. All grooves are 7 mm. in diameter, and are found on all surfaces of the stone. It could have been obtained from the coast of Lantau near Tai O.

Broken portion of large polished and shouldered adze: 4 cm. of the tang and 3 cm. of the body on one side remain. The shoulder has been hollowed out in part by pecking. The material is a fine-grained acid rock, probably from one of the many dykes of that type in the Lantau hills; it appears to have abundant small muscovite crystals.

From sector K: part of a roughed-out 'blank' for making what may have been intended for a shouldered adze. The edges appear to have been hammered to produce a secondary flaking, and pos sibly an unlucky blow split the stone and the worker threw it away.

From hillside above sector L: an implement originally formed as a polished adze, with curved edge making an angle with the rounded sides, and later blunted by wear and discarded. Later

Comments

Approved members can add comments, bookmarks, and private notes.

No comments yet.

Private Research Note

Private notes are available after approval.