1964_IMPORT_AND_EXPORT_(STRATEGIC_COMMODITIES)_REGULATIONS — Page 94

HK Historical Laws 香港歷史法例 All AI Reviewed

G 94

CAP. 60]

Import and Export (Strategic Commodities) Regulations

[1988 Ed.

[Subsidiary]

(o) Peripheral positive-channel type or negative-channel type metal-oxide-semiconductor (PMOS or NMOS) "monolithic integrated circuits" or "multichip integrated circuits", designed only for:

(1) The support of "microprocessor microcircuits" which are excluded from embargo by (d)(2)(D)(i) above; and

(2) Any of the following functions:

(A) Parallel input/output controller (PIO),

(B) Serial input/output controller (SIO)

(C) Dual asynchronous receiver/transmitter (DART); or

(D) Counter/timer circuit (CTC);

(p) Sample and hold "monolithic integrated circuits", "hybrid integrated circuits", "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics:

(1) An acquisition time of no less than 10 microsecond; and

(2) A non-linearity, (i.e. a deviation from an ideal straight line), of equal to or worse than ±0.01 per cent of full scale for a hold time of 1 microsecond;

(q) Timing "monolithic integrated circuits", "hybrid integrated circuits", "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics:

(1) A typical timing error of no less than 0.5 per cent; and

(2) A typical rise time of no less than 100 ns; or

(r) Voltage "monolithic integrated circuits", "multichip integrated circuits", "film type integrated circuits" or "hybrid integrated circuits", as follows:

(1) Voltage comparators, having both of the following characteristics:

3

(A) A maximum input offset voltage of no less than 2 mV; and

(B) A "typical switching speed", i.e. typical response time of no less than 30 ns;

(2) Voltage references, having both of the following characteristics:

(A) A rated accuracy of no better than ±0.1 per cent; and

(B) A temperature coefficient of the voltage of no less than 15 x 10-6/°C; or

(3) Linear type voltage regulators, having both of the following characteristics:

(A) A rated nominal output voltage of 50 V or less; and

(B) A maximum output current of 2A or less;

(4) Switching type voltage regulators, having both of the following characteristics:

(A) A rated nominal output voltage of 40 V or less; and

(B) A maximum output current of 150 mA or less;

Notes:

1. For voltage regulators, the 358K (85°C) upper temperature limit specified in (d)(B)(2) above is not applicable. The lower limit of 233K (-40°C) is applicable.

2. See (d)(2)(D)(m)(4) above for rms-to-DC voltage converters and (d)(2)(D)(m)(5) for voltage-to-frequency converters.

(s) Non-coherent light-emitting alphanumeric displays, which do not incorporate other "monolithic integrated circuits";

1

Edit History

2026-05-04 20:11:08 · NVIDIA / meta/llama-4-maverick-17b-128e-instruct
Live
View comparison
AI Proofread
G 94 CAP. 60] Import and Export (Strategic Commodities) Regulations [1988 Ed. [Subsidiary] (o) Peripheral positive-channel type or negative-channel type metal-oxide-semiconductor (PMOS or NMOS) "monolithic integrated circuits" or "multichip integrated circuits", designed only for: (1) The support of "microprocessor microcircuits" which are excluded from embargo by (d)(2)(D)(i) above; and (2) Any of the following functions: (A) Parallel input/output controller (PIO), (B) Serial input/output controller (SIO) (C) Dual asynchronous receiver/transmitter (DART); or (D) Counter/timer circuit (CTC); (p) Sample and hold "monolithic integrated circuits", "hybrid integrated circuits", "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics: (1) An acquisition time of no less than 10 microsecond; and (2) A non-linearity, (i.e. a deviation from an ideal straight line), of equal to or worse than ±0.01 per cent of full scale for a hold time of 1 microsecond; (q) Timing "monolithic integrated circuits", "hybrid integrated circuits", "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics: (1) A typical timing error of no less than 0.5 per cent; and (2) A typical rise time of no less than 100 ns; or (r) Voltage "monolithic integrated circuits", "multichip integrated circuits", "film type integrated circuits" or "hybrid integrated circuits", as follows: (1) Voltage comparators, having both of the following characteristics: 3 (A) A maximum input offset voltage of no less than 2 mV; and (B) A "typical switching speed", i.e. typical response time of no less than 30 ns; (2) Voltage references, having both of the following characteristics: (A) A rated accuracy of no better than ±0.1 per cent; and (B) A temperature coefficient of the voltage of no less than 15 x 10-6/°C; or (3) Linear type voltage regulators, having both of the following characteristics: (A) A rated nominal output voltage of 50 V or less; and (B) A maximum output current of 2A or less; (4) Switching type voltage regulators, having both of the following characteristics: (A) A rated nominal output voltage of 40 V or less; and (B) A maximum output current of 150 mA or less; Notes: 1. For voltage regulators, the 358K (85°C) upper temperature limit specified in (d)(B)(2) above is not applicable. The lower limit of 233K (-40°C) is applicable. 2. See (d)(2)(D)(m)(4) above for rms-to-DC voltage converters and (d)(2)(D)(m)(5) for voltage-to-frequency converters. (s) Non-coherent light-emitting alphanumeric displays, which do not incorporate other "monolithic integrated circuits"; 1
Baseline (Original)
G 94 CAP. 60] Import and Export (Strategic Commodities) Regulations [1988 Ed. [Subsidiary] (0) Peripheral positive-channel type or negative-channel type metal- oxide-semiconductor (PMOS or NMOS) "monolithic integrated circuits" or "multichip integrated circuits", designed only for: (1) The support of "microprocessor microcircuits" which are excluded from embargo by (d)(2)(D)(i) above; and (2) Any of the following functions: (A) Parallel input/output controller (PIO), (B) Serial input/output controller (SIO) (C) Dual asynchronous receiver/transmitter (DART); or (D) Counter/timer circuit (CTC); (p) Sample and hold "monolithic integrated/circuits", "hybrid integrated circuits", "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics: (1) An acquisition time of no less than 10 microsecond; and (2) A non-linearity, (i.e. a deviation from an ideal straight line), of equal to or worse than ±0.01 per cent of full scale for a hold time of 1 microsecond; (g) Timing "monolithic integrated circuits”, “hybrid integrated circuits”, "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics: (1) A typical timing error offno less than 10.5 per cent; and (2) A typical rise time of no less than 100 ns; or (r) Voltage "monolithic integrated circuits", "multichip integrated circuits", "film type integrated circuits" or "hybrid integrated circuits", as follows: (1) Voltage comparators, having both of the following charac- teristics: 3 (A) A maximum input offset voltage of no less than 2 mV; and (B) A "typical switching speed", i.e. typical response time of no less than 30 ns; (2) Voltage references, having both of the following characteristics: (A) A rated accuracy of no better than ±0.1 per cent; and (B) A temperature coefficient of the voltage of no less than 15 x 10 /; or (3) Linear type voltage regulators, having both of the following characteristics (A) A rated nominal output voltage of 50 V or less; and (B) A maximum output current of 2A or less; (4) Switching type voltage regulators, having both of the following characteristics: (A) A rated hominal output voltage of 40 V or less; and (B) A maximum output current of 150 mA or less; Notes: 1. For voltage regulators, the 358K (85°C) upper temperature limit specified in (d)(B)(2) above is not applicable. The lower limit of 233K (-40°C) is applicable. 2. See (d)(2)(D)(m)(4) above for rms-to-DC voltage converters and (d)(2)(D)(m)(5) for voltage-to-frequency converters. (s) Non-coherent light-emitting alphanumeric displays, which do not incorporate other "monolithic integrated circuits”; 1
2026-05-04 20:11:08 · Baseline
View content

G 94

CAP. 60]

Import and Export (Strategic Commodities) Regulations

[1988 Ed.

[Subsidiary]

(0) Peripheral positive-channel type or negative-channel type metal- oxide-semiconductor (PMOS or NMOS) "monolithic integrated circuits" or "multichip integrated circuits", designed only for:

(1) The support of "microprocessor microcircuits" which are

excluded from embargo by (d)(2)(D)(i) above; and

(2) Any of the following functions:

(A) Parallel input/output controller (PIO),

(B) Serial input/output controller (SIO)

(C) Dual asynchronous receiver/transmitter (DART); or

(D) Counter/timer circuit (CTC);

(p) Sample and hold "monolithic integrated/circuits", "hybrid integrated circuits", "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics:

(1) An acquisition time of no less than 10 microsecond; and

(2) A non-linearity, (i.e. a deviation from an ideal straight line), of equal to or worse than ±0.01 per cent of full scale for a hold time of 1 microsecond;

(g) Timing "monolithic integrated circuits”, “hybrid integrated circuits”, "film type integrated circuits" or "multichip integrated circuits", having both of the following characteristics:

(1) A typical timing error offno less than 10.5 per cent; and (2) A typical rise time of no less than 100 ns; or

(r) Voltage "monolithic integrated circuits", "multichip integrated circuits", "film type integrated circuits" or "hybrid integrated circuits", as follows:

(1) Voltage comparators, having both of the following charac-

teristics:

3

(A) A maximum input offset voltage of no less than 2 mV; and (B) A "typical switching speed", i.e. typical response time of

no less than 30 ns;

(2) Voltage references, having both of the following characteristics:

(A) A rated accuracy of no better than ±0.1 per cent; and

(B) A temperature coefficient of the voltage of no less than

15 x 10 /; or

(3) Linear type voltage regulators, having both of the following

characteristics

(A) A rated nominal output voltage of 50 V or less; and

(B) A maximum output current of 2A or less;

(4) Switching type voltage regulators, having both of the following

characteristics:

(A) A rated hominal output voltage of 40 V or less; and

(B) A maximum output current of 150 mA or less;

Notes:

1. For voltage regulators, the 358K (85°C) upper temperature limit specified in (d)(B)(2) above is not applicable. The lower limit of 233K (-40°C) is applicable.

2. See (d)(2)(D)(m)(4) above for rms-to-DC voltage converters

and (d)(2)(D)(m)(5) for voltage-to-frequency converters.

(s) Non-coherent light-emitting alphanumeric displays, which do not

incorporate other "monolithic integrated circuits”;

1

Comments

Approved members can add comments, bookmarks, and private notes.

No comments yet.

Private Research Note

Private notes are available after approval.