1964_IMPORT_AND_EXPORT_(STRATEGIC_COMMODITIES)_REGULATIONS — Page 88

G 88

CAP. 60]

Import and Export (Strategic Commodities) Regulations

[1988 Ed.

[Subsidiary]

(1) Encapsulated passive networks;

Note:

Technology for the manufacture of thin film passive networks is not released from embargo by this sub-item.

(2) Encapsulated integrated circuits, having all of the following characteristics:

(A) Not designed or rated as radiation hardened;

(B) Not rated for operation at an ambient temperature below 233K (-40°C)

or above 358K (85°C);

(C) Packaged in any of the following casings:

(a) TO-5 outline cases (diameter 7.7 to 9.4 mm, i.e. 0.305 to 0.370 inch);

or

(b) Non-hermetically sealed cases; and

(D) Being any of the following types:

(a) Bipolar “monolithic integrated Circuits", having all of the following

characteristics:

(1) Designed to perform a single digital logic function or a

combination of digital logic functions;

(2) Encapsulated in packages having 24 terminals or less;

(3) A “basic gate propagation delay time” of no less than 3 ns; (4) A “basic gate power dissipation" of no less than 2 mW; and (5) A product of the "basic gate propagation delay time" and the "basic gate power dissipation" per gate of no less than 30 pJ for types having a "basic gate propagation delay time" of 3`ns or more and less than 5 ns;

(6) Bipolar "monolithic integrated circuits", having all of the following

characteristics:

(1) Designed for operation in civil applications;

(2) Being either:

(A) Electronic switches, externally controlled by inductive,

magnetic or optical means; or

(B) Threshold value switches; and

(3) With switching times of 0.5 microsecond or more;

(c) Complementary metal-oxide semiconductor (CMOS) "monolithic

integrated circuits", having all of the following characteristics:

(1) Designed for operation as digital logic circuit elements but limited to gates, inverters, buffers, flip-flops, latches, multi- vibrators, bilateral switches, display drivers, fixed counters, fixed frequency dividers, storage registers, decoders, voltage translators, encoders, Schmidt triggers, delay timers, carry generators, clock generators, or any combination of the above digital logic functions;

(2) Encapsulated in packages having 24 terminals or less; and (3) A minimum value of the "basic gate propagation delay time”

Aunder any rated condition of no less than 10 ns;

(d) Positive-channel type or negative-channel type metal-oxide semi- conductor (PMOŠ" or NMŌS) “monolithic integrated circuits", having all of the following characteristics:

(1) Designed for and by virtue of circuit design limited to use as

serial digital shift registers;

(2) A maximum clock rate of 10 MHz, and (3) A maximum of 1 024 bit per package,