1964_BOILERS_AND_PRESSUER_VESSELS_ORDINANCE — Page 15

HK Historical Laws 香港歷史法例 All AI Reviewed

14

CAP. 56

Boilers and Pressure Vessels

[1988 Ed.

Power of Authority to exempt classes or types of boiler or pressure vessel from provisions of Ordinance

10. (1) The Authority may by order exempt from any of the provisions of this Ordinance boilers or pressure vessels of a class or type to which he is satisfied that such provision cannot reasonably be applied.

(2) Any such exemption shall be subject to such conditions as may be specified in the order.

(3) The Authority may by order cancel or amend any order made under subsection (1).

(4) A notification of every order made under this section shall be published in the Gazette.

(Amended 87 of 1988 ss. 34 & 36)

PART III

REGISTRATION OF BOILERS, PRESSURE VESSELS AND

STEAM CONTAINERS

Boilers, pressure vessels (other than pressurized fuel containers) and steam containers

(Amended 87 of 1988 ss. 32 & 34)

E

11-12. (Repealed 67 of 1978 s. 7)

Documents to be delivered to Authority in respect of new

boilers and pressure vessels

13. The owner of a new boiler or pressure vessel, other than a pressurized fuel container, shall, not less than 30 days before the day on which he intends to put the boiler or pressure vessel into use, deliver to the Authority-

(a) one copy of the maker's certificate and one copy of the certificate of inspection during construction issued in respect of the boiler or pressure vessel by a recognized inspection body; or

(b)

(c)

documentary evidence, to the satisfaction of the Authority, that the boiler or pressure vessel complies with a recognized engineering standard or code in respect of—

(i) the welders employed and welding procedures used in the construction and erection of and, if repairs have been carried out, in the repairs to, the boiler or pressure vessel;

(ii) heat treatment before and after welding;

(iii) tests and inspections carried out on the boiler or pressure vessel; and

(iv) any other relevant technical details that the Authority may, by notice in writing, specify; or

where the owner can deliver neither the documents referred to in paragraph (a) nor the documents referred to in paragraph (b), details

Page 15

Page 16

Edit History

2026-05-04 07:40:56 · NVIDIA / meta/llama-4-maverick-17b-128e-instruct
Live
View comparison
AI Proofread
14 CAP. 56 Boilers and Pressure Vessels [1988 Ed. Power of Authority to exempt classes or types of boiler or pressure vessel from provisions of Ordinance 10. (1) The Authority may by order exempt from any of the provisions of this Ordinance boilers or pressure vessels of a class or type to which he is satisfied that such provision cannot reasonably be applied. (2) Any such exemption shall be subject to such conditions as may be specified in the order. (3) The Authority may by order cancel or amend any order made under subsection (1). (4) A notification of every order made under this section shall be published in the Gazette. (Amended 87 of 1988 ss. 34 & 36) PART III REGISTRATION OF BOILERS, PRESSURE VESSELS AND STEAM CONTAINERS Boilers, pressure vessels (other than pressurized fuel containers) and steam containers (Amended 87 of 1988 ss. 32 & 34) E 11-12. (Repealed 67 of 1978 s. 7) Documents to be delivered to Authority in respect of new boilers and pressure vessels 13. The owner of a new boiler or pressure vessel, other than a pressurized fuel container, shall, not less than 30 days before the day on which he intends to put the boiler or pressure vessel into use, deliver to the Authority- (a) one copy of the maker's certificate and one copy of the certificate of inspection during construction issued in respect of the boiler or pressure vessel by a recognized inspection body; or (b) (c) documentary evidence, to the satisfaction of the Authority, that the boiler or pressure vessel complies with a recognized engineering standard or code in respect of— (i) the welders employed and welding procedures used in the construction and erection of and, if repairs have been carried out, in the repairs to, the boiler or pressure vessel; (ii) heat treatment before and after welding; (iii) tests and inspections carried out on the boiler or pressure vessel; and (iv) any other relevant technical details that the Authority may, by notice in writing, specify; or where the owner can deliver neither the documents referred to in paragraph (a) nor the documents referred to in paragraph (b), details Page 15 Page 16
Baseline (Original)
14 CAP. 56 Boilers and Pressure Vessels [1988 Ed. Power of Authority to exempt classes or types of boiler or pressure vessel from provisions of Ordinance 10. (1) The Authority may by order exempt from any of the provisions of this Ordinance boilers or pressure vessels of a class or type to which he is satisfied that such provision cannot reasonably be applied. (2) Any such exemption shall be subject to such conditions as may be specified in the order. (3) The Authority may by order cancel or amend any order made under subsection (1). (4) A notification of every order made under this section shall be published in the Gazette. (Amended 87 of 1988 ss. 34 & 36) PART III REGISTRATION OF BOILERS, PRESSURE VESSELS AND STEAM CONTAINERS Boilers, pressure vessels (other than pressurized fuel containers) and steam containers (Amended 87 of 1988 ss. 32 & 34) E 11-12. (Repealed 67 of 1978 s. 7) Documents to be delivered to Authority in respect of new boilers and pressure vessels 13. The owner of a new boiler or pressure vessel, other than a pressurized fuel container, shall, not less than 30 days before the day on which he intends to put the boiler or pressure vessel into use, deliver to the Authority- (a) one copy of the maker's certificate and one copy of the certificate of inspection during construction issued in respect of the boiler or pressure vessel by a recognized inspection body; or (b) (c) documentary evidence, to the satisfaction of the Authority, that the boiler or pressure vessel complies with a recognized engineering standard or code in respect of— (i) the welders employed and welding procedures used in the construction and erection of and, if repairs have been carried out, in the repairs to, the boiler or pressure vessel; (ii) heat treatment before and after welding; (iii) tests and inspections carried out on the boiler or pressure vessel; and (iv) any other relevant technical details that the Authority may, by notice in writing, specify; or where the owner can deliver neither the documents referred to in paragraph (a) nor the documents referred to in paragraph (b), details Page 15Page 16
2026-05-04 07:40:56 · Baseline
View content

14

CAP. 56

Boilers and Pressure Vessels

[1988 Ed.

Power of Authority to exempt classes or types of boiler or pressure vessel from provisions of Ordinance

10. (1) The Authority may by order exempt from any of the provisions of this Ordinance boilers or pressure vessels of a class or type to which he is satisfied that such provision cannot reasonably be applied.

(2) Any such exemption shall be subject to such conditions as may be specified in the order.

(3) The Authority may by order cancel or amend any order made under subsection (1).

(4) A notification of every order made under this section shall be published in the Gazette.

(Amended 87 of 1988 ss. 34 & 36)

PART III

REGISTRATION OF BOILERS, PRESSURE VESSELS AND

STEAM CONTAINERS

Boilers, pressure vessels (other than pressurized fuel containers) and steam containers

(Amended 87 of 1988 ss. 32 & 34)

E

11-12. (Repealed 67 of 1978 s. 7)

Documents to be delivered to Authority in respect of new

boilers and pressure vessels

13. The owner of a new boiler or pressure vessel, other than a pressurized fuel container, shall, not less than 30 days before the day on which he intends to put the boiler or pressure vessel into use, deliver to the Authority-

(a) one copy of the maker's certificate and one copy of the certificate of inspection during construction issued in respect of the boiler or pressure vessel by a recognized inspection body; or

(b)

(c)

documentary evidence, to the satisfaction of the Authority, that the boiler or pressure vessel complies with a recognized engineering standard or code in respect of—

(i) the welders employed and welding procedures used in the construction and erection of and, if repairs have been carried out, in the repairs to, the boiler or pressure vessel;

(ii) heat treatment before and after welding;

(iii) tests and inspections carried out on the boiler or pressure vessel; and

(iv) any other relevant technical details that the Authority may, by notice in writing, specify; or

where the owner can deliver neither the documents referred to in paragraph (a) nor the documents referred to in paragraph (b), details

Page 15Page 16

Comments

Approved members can add comments, bookmarks, and private notes.

No comments yet.

Private Research Note

Private notes are available after approval.