No_5_February_1964 — Page 67

THROUGHOUT THE WORLD

OMARK

QUALITY TOOLS

ARE MAKING

CONSTRUCTION WORK

FASTER, EASIER

AND LESS EXPENSIVE

Equipment for drilling, cutting and fastening to structural steel, concrete, masonry.

OMARK DRILLING MACHINES

FOR CONCRETE, MASONRY

OMARK Drilling machine bores clean holes in toughest reinforced concrete from 1⁄4" to 12" in diameter. OMARK diamond bits available in three types from " to 14" in diameter.

An easily installed OMARK truck-mounted drill is ideally suited for highway test coring and

installation of road signs.

OMARK CONCRETE, MASONRY SAWS

DIAMOND & ABRASIVE BLADES

OMARK self-propelled concrete saws use long lasting diamond or abrasive blades for fast, economical sawing of asphalt and concrete on highways, airports, concrete floors, etc.

OMARK masonry saws cut all types of masonry smoothly and accurately.

DIAMOND BITS

I}}

OMARK GRAMWELD

PERCUSSIVE STUD WELDING MACHINES AND STUDS

The OMARK percus- sive stud welding sys- tem welds inexpensive small OMARK studs to thin metal without burn-through or dis- tortion. The method is suitable for ductwork, building and tank insu- lation, roofing, siding, etc.

DRIVE-IT®

POWDER OPERATED TOOLS AND DRIVEPINS

Hand operated, self powered tool, anchors anything fast, economically and securely to concrete or steel. Several models. All use special pow- der loads and Drivepins. Pins available from 1" to 6" long in threaded, headed and eye- let types.

HAMMER DRIVE

MANUAL FASTENING TOOL

Hammer Drive tools concentrate the force of a hammer blow to drive hardened steel drivepins securely into concrete or steel. No cartridges, power or air needed. Safe, econom- ical and easy to use.

QUALIFIED TECHNICIANS ARE AVAILABLE TO PROVIDE SPECIFIC APPLICATION ASSISTANCE. PLEASE CONTACT YOUR LOCAL OMARK TECHNICAL REPRESENTATIVE OR OMARK TECHNICAL CENTER IN THE U.S.A.

Limited Dealerships Available

OMARK CONCRETE DRILL ANCHORS

Six types of self-drilling and non-drilling expansion an- chors for concrete. Easy to install with an air, electric or hand hammer. Gives strong, vibration-proof fastenings. that resist high pullout loads.

OMARK INTERNATIONAL, LTD.

2100 S. E. Milport Road Portland 22, Oregon Dept. 501

THE HONG KỌNG & FAR EAST BUILDER

-

VOLUME 18, NUMBER 5

61