air compressor incorporated in each machine supplies compressed air through a separate air hose to the spray nozzle for atomising the mix. All the machines are mounted on a two-wheel chassis with solid-rubber- tyred wheels on torsion-bar suspension.
Supplied with each machine is 90) ft. of heavy-duty flexible high-pressure hose, terminating in a plaster-spray gun with a rubber nozzle and connec- tion to the air supply. Remote con- trol is provided at the nozzle by means of an air valve. A separate 4.2 cu. ft. storage hopper and supply hose is pro- vided with each machine.
The
The smallest model in the range is the diesel or electric motor powered Type K 120. The Type K 160 ZD features a 7 h.p. diesel and, the K 160 ZE a 7 h.p. electric motor. largest model is the Type H 200 ZD (12 h.p. diesel) and ZE (10 h.p. elec- tric motor). Both the Type K 160 and H 200 have an integral turbo mixer.
Errut Products Ltd.. Jubilee Works, Jubilee Close. Townsend Lane, Lon- don, N.W.9, the concessionaires for the machines, are seeking agents in S.E. Asia.
CRANE
Truck-mounted Unit with Telescopic Jib
THE Teleflash truck-mounted crane has a telescopic jib which can com- pletely unfold continuously. The winch can exert a pull of 2 tons on a single wire and has a maximum hoist- ing capacity of 8 tons.
All the mechanisms slewing and traversing
winching,
rotate on an
oil film and can be controlled as de- sired in either direction through a single or multi-speed transfer box. In addition they are linked via a flexible transmission system or universal joint shafting.
The telescopic jib can unfold un- der power and measures 18 m. in length, with a hook clearance of 19 m. and a load capacity of 1.5 tons. An additional reach of 3 m. is pro-
Teleflash truck-mounted crane
Far East BUILDER, April 1968.
vided by a supplementary jib with an angle of inclination from 0 to 30 de- grees and a maximum load of 1 ton.
The crane, which is fully hydraulic, can be assembled directly on trucks with an effective load of 8 tons and a power take off of about 30 h.p.
Further information is available from the makers, Societe Haulotte, La Martiniere, 73, Chambery, France.
WORK PLATFORM
Articulated Boom with 360-degree Swing
REACHING a working height of 40 ft.. the Skyscraper SK500 40 aerial work platform is fitted with a hydrau- lic accumulator to ensure even control over the platform movement.
Controls enable the operator to re- gulate the speed of his approach from dead slow to a safe preset maximum.
The unit has two articulated booms and 360 degree slewing. An 8 ft. glass fibre insert is incorporated in the
Skyscraper SK500/40 platform
upper boom, and additional protection against contact with live wires is pro- vided by covering the lower section of the upper boom with glass fibre skin.
Power for the unit's hydraulic sys- tem is normally truck p.t.o., but al- ternative electric, battery or auxiliary engine systems may be used. A series of fail-safe valves in the hydraulic system prevents the booms collapsing in the event of hydraulic lines bursting.
The standard work basket is of glass fibre and measures 3 ft. by 2 ft. by 3 ft. 6 in.
Distributors of the Skycraper are Marweight Equipment Ltd., 236 Ad- derley Street, West Melbourne, Vic- toria, Aust. Agents in S.E. Asia are: Ewman and Co. Ltd., Hong Kong: The China Engineers Ltd., Kuala Lumpur: James Warren and Co. Ltd., Singapore; San Pablo Oil Factory Inc.. Manila.
BREAKERS
Heavy Duty Machines for Demolition Work
TWO 'super breakers' have been added to the range made by Atlas Copco AB, Stockholm 1, Sweden. They are the PH5S and the PH180S,
PH5S super breaker
intended for use on machine founda- tions and on concrete surfaces where it is not possible to blast.
Both models have been developed from the company's range of double acting pile and sheeting drivers.
The PH5S is the smaller of the two, weighing 530 kg (1200 lb) with a capacity of 310 blows per minute. The breaker's length, without its chisel, is 1200 mm (47 in.) and its air consumption is 2,6m3/min. (92cfm). Corresponding figures for the PH180S are 1100 kg (2470 lb.): 330 blows per minute: 1400 mm (55 in.); and 4.5m3/min (155 cfm).
Agents are: China Engineers, Ltd., Hong Kong: Scandia Inc., Manila: Diethelm & Co. Ltd., Bangkok; and Jardine Waugh (M) Ltd., Kuala Lumpur.
PUMP
Capacity of 5,000 g.p.h. at 10 ft. Head
THE Labawco Big Gusher is a self- priming centrifugal pump with a wide variety of uses on building and civil engineering sites.
Powered by a 3 h.p, petrol engine, it has a capacity of 5,000 g.p.h, at 10 ft. head. The suction and dis- charge connections are of 11⁄2 in. dia- meter. Total weight of the pump, com- plete with base, coupling and com- bination foot valve-strainer is 33 lb. Further information is available from Almar International. Wyckoff, New Jersey, USA.
Labawco Big Gusher
55
55
Page 45Page 46
No comments yet.
Private notes are available after approval.