contractors'
plant
MULTI ONTBRUS
speeds of 26.1 m.p.h. forward, 16.6 m.p.h. reverse.
The 980 is articulated at the mid- point of the wheelbase to allow rear wheels to perfectly track front wheels. The wheelbase is 130 in. yet articulation permits a turning radius of only 22 ft.
The operator sits on the rear sec- tion of the 980, with a perfect view of the loader linkage, the bucket and the front tyres.
TRUCK
Dodge Range Has Tilt Cabs
A TILT cab is fitted to all eight models in a new range of Dodge trucks, the 500 series. In 30 seconds. including the release of two locking
COMPRESSOR
Wabco De Luxe Model Delivers 125 c. f. m.
THE Le Roi Division of Westing- house Air Brake Co.. Sidney, Ohio, USA, has introduced a de luxe 125 c.f.m. single stage rotary portable compressor. Designated the 125 RGIA, the machine is powered by a D226 petrol engine.
This heavy duty four cylinder in- dustrial engine has overhead valves and replaceable wet sleeves for easy
H
Wabco 125 c.f.m. compressor
maintenance, Standard accessories include an hourmeter, lifting bail, au- tomotive tyres, fuel level gauge and spring loaded swivel towing eye.
A companion 220 cu. in. Ford diesel engine is also offered and both models are available as utility units for truck mounting.
Agents include: William Jacks and Co. (Malaya) Ltd., Kuala Lum- pur: Atlantic Gulf and Pacific Co., Manila; D.C.J. (1961) Ltd., Bangkok: and Van Sun Co., Taipei.
CONCRETE MIXER Control Panel Gives
Five Water Cement Ratios
A MULTIPLE version of the Ameri- can Hydrobot concrete-mixing con- trol allows the selection of up to five
+
Multi-Hydrobot control
claimed, and without waste of cement. “Auto-Manual" and "Water On-Off" switches allow for manual operation when required, and an indicator gauge monitors functioning by show- ing when the mixture is correct or too wet or too dry.
Cornelly Equipment Co. Ltd.. 74 Gloucester Place, London, W.1. are the makers representatives in South East Asia. They would like to ap- point agents.
WHEEL LOADER
Articulated Machine has 235 h.p. engine
A NEW front end loader, the 980, has been announced by Caterpillar Overseas S.A., Case Postale 1211, Geneva 3, Switzerland. It is power ed by a 235 h.p. (flywheel) Cat. D336 diesel engine. A hydraulic governor and a hydraulically actuated variable timing device make the new engine extremely responsive and allow pre- cise operator control over engine speed.
With a bucket range of 4 to 5 cu. yd. and a static tipping load (straight ahead) of 28,600
lb., the 980 is es- pecially applicable for high produc- tion loading sand, gravel, shot
different water cement ratios, each of rock and other
which is controlled automatically.
The device, known as the Multi- Hydrobot, makes use of a pair of sensing electrodes in the mixer. It regulates the water supply, turning it on when a "start" button is pressed, and off when the correct ratio is reached.
It is simple to use: the required ratios are set on five dials. and select- ed on corresponding buttons. Once set, a mix can be repeated as desired to a high degree of uniformity, it is
Far East Architect & Builder June, 1966
heavy materials.
A full range planetary power- shift transmission and a torque con- vertor are fitted and directional and range changes can be made without stopping. Four for- ward ranges and three reverse ranges allow top travel
Dodge tilt-cab
devices, one man can tilt the cab forward to give clear access to the engine and its components.
The range includes 15 wheelbase variations, four power units and a wide range of axle ratios and trans- missions. Gross vehicle ratings are from 23,000 lb. to 49,280 lb.
Chrysler V diesels with six or eight cylinders are the standard power units for the entire series. The 352 cu. in. V6-1 and V6-2
Caterpillar 980 wheel-loader
69
No comments yet.
Private notes are available after approval.