PRESERVATIVE MANUFACTURERS
1789
ATLAS "E" PREVENTS BOILER CORROSION
THE above illustrates the action of Atlas Boiler Preservative "E" in precipitating incrusting solids from feed waters and preventing corrosion. Into each Tube was placed an equally bright nail. To the left-hand Tube of each pair (marked “E”) was added a few drops of ATLAS "E" and the other left untreated. The results shewn are eight months after tubes were prepared.
LOCOMOTIVE BOILERS:- For effici- ency and economy treat the boilers internally with a suitable re-agent. ATLAS "E" softens and disintegrates existing scale and prevents further formation. It immediately arrests corrosion, cleanses out the affected parts leaving the healthy metal clean and dry; and prevents fur- ther action by neutr. lising all matter productive of acid reaction." ATLAS "E" means Loco, boilers run from 4 to 8 weeks without opening.
•
•
*
STATIONARY BOILERS :--Fuel con- sumption and power costs are direct- ly increased by the thickness of scale on plates and tubes. High pressures render scale of any thickness a direct menace to the safety of boilers. Grease is another danger in modern high pressure boilers using condensed feed. ATLAS "E" elimi- nates corrosion, destroys grease and pre- vents scale.
•
MARINE BOILERS: Many vessels using
ATLAS “E” are running boilers upwards of six months without emptying. ATLAS "E" removes existing scale and oxide deposits, cleanses corroded parts, and destroys grease. No chipping or scaling: ATLAS treated boilers only require brushing out.
Where to Obtain ATLAS "E" Boiler Preservative :-
RILEY, HARGREAVES & CO., LD., Singapore, | ATLAS PRESERVATIVE Co.. Ld.
CARMICHAEL & CLARKE, Hongkong.
THOS. KERSHAW, Kobe.
WILSON & Co., Manila.
Windmill Lane Wharf, Deptford,
LONDON, S.E.
Page 71 I
E
Page ZII
No comments yet.
Private notes are available after approval.