10
Purpose or service.
Minimum fee
(6) For one single-ended cylindrical boiler, per fool, or part of a foot, of the total width of the furnaces
Minimum fee
(c) For one water tube boiler, per foot, or part of a fool, of the total width of the furnaces
Minimum fee
(d) For survey of each additional boiler ordered at the same time to the same design of the same makers
(e) For re-survey when no inspection of
plans is involved
Note: These fees include inspection of the drawings and the survey of the boilers up to and including the hydraulic test
Fees.
$ 470.00
90.00
435.00
90.00
435.00
of the fee at (a), (b) OT (c)
Total fee as at (o), (b) or (c) less $200.00, subject to the min- imum fee being pay- abic.
2. For survey of boiler parts, machinery, ela-
(a) Air receivers or welded pressure vessels
up to 15 cu. ft, capacity cach
170.00
(5) Each additional unit in the sanse order (c) Air receivers or welded pressure vessels
over 15 cu. ft. capacity each
(20) Auxiliary unit, such as feed heater or filter, distiller, pump, etc. but excluding dil fuel heater and filterat each item
60.00
233.00
170.00
(e) Boiler mountings for one boiler
325,00
(For every additional similar set to the
same order
170.00
(g) Electric generators and motors including
Lest of material
325.00
(4) Electric generators and motors excluding
test of material
235.00
() Main switchboard tests-per main circuit breaker ............@paixâ++*trates duskoorLLTIDER
170.00
3. For acceptance as standard type of engines,
internal combustion up to 1.50 B.H.P.-
(a) For examination of design and inspec tion of first engine made to the design and the issue of a certificate of test
585.00
=
Purpose or service.
(b) For examination of engines (including shafting), steam reciprocating or internal combustion, in one ship, having a total
Fees.
of
G) 100 circular juches or under
235.00
(ii) above 100 and including 250 dir-
cular inches
325.00
(ii) above 250 and including 500 cir-
cular inches
$85.00
(iv) above 500 and including 1,000 cir-
cular inches
1,030.00
325.00
(v) for every additional 1,000 circular
inches or part thereof Note: "Circular inches" means the sum of the squares of the engine cylinder dia- meters, measured in inches.
4. For survey of engines, steam turbines, olc.-
(a) Engines, steam turbines in one ship,
having a total of 1,000 s.h.p, or under. (b) For every additional 1,000 sh.p. or part thereaf........................
1,030,00
325.00
(c) For every additional visit above two ... (d) Evaporator, each unit
215.00
295.00
(e) Main gearing: any one main pinico and
associated main gear wheel
$85.00
(
Any one main pinion only
375.00
(g) One main thrust shaft with associated
main tunnel shafting
$85.00
385.00
(A) Propeller, propeller shaft and tiem tube Note: (1) Where any two of items (e), (0% (g) or (A) are combined the total fer shall be $600.00.
(2) If parts of boilers and machinery are eventually installed in a ship under survey for a passenger certificate the fee will be regarded as part of the Murvey fee.
5. For survey of oil fuel burning installations— (a) Oil fuel burning installation only, per boiler-room but not including boiler front arrangements
(B) Boiler front arrangement, per boiler
froat (e) Oil fuel tanks, double bottom tanks, or other tanks forming part of the ship's structure and intended for storage of oil fuel, or water ballast, or fresh water, per tenk
705.00
235.00
735.00
No comments yet.
Private notes are available after approval.